White Papers

Usage
Information
You must include the colon (:) when entering this command.
CAUTION: This command deletes all files, including the startup configuration file. So, after
executing this command, consider saving the running config as the startup config (use the
write memory command or copy run start command).
Related
Commands
copy – copies the current configuration to either the startup-configuration file or the terminal.
show file – displays the contents of a text file in the local filesystem.
show file-systems – displays information about the file systems on the system.
HTTP Copy via CLI
Copy one file to another location. Dell Networking OS supports IPv4 and IPv6 addressing for FTP, TFTP, and SCP (in the hostip
field).
Syntax
copy http://10.16.206.77/sample_file flash://sample_filecopy flash://
sample_file http://10.16.206.77/sample_file
You can copy from the server to the switch and vice-versa.
Parameters
copy http:
flash:
Address or name of remote host []: 10.16.206.77
Port number of the server [80]:
Source file name []: sample_file
User name to login remote host: x
Password to login remote host:
Destination file name [sample_file]:
Defaults None.
Command Modes EXEC
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Introduced on the FN I/O Aggregator.
9.3(0.1) Introduced on the M I/O Aggregator.
Example
copy http://admin:admin123@10.16.206.77/sample_file flash://sample_file
Related
Commands
copy ftp:flash
Copy files from FTP server to switch
logging coredump stack-unit
Enable the coredump.
Syntax
logging coredump stack-unit all
Command Modes CONFIGURATION
Supported Modes All Modes
File Management 63