White Papers

Version Description
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Entering a no debug ip bgp command removes all configured debug commands for BGP.
debug ip bgp ipv6 dampening
View information on dampened (non-active) IPv6 routes.
Syntax
debug ip bgp ipv6 unicast dampening [in | out]
To disable debugging, use the no debug ip bgp ipv6 unicast dampening command.
Parameters
in (OPTIONAL) Enter the keyword in to view only inbound dampened routes.
out (OPTIONAL) Enter the keyword out to view only outbound dampened routes.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Entering a no debug ip bgp command removes all configured debug commands for BGP.
Related
Commands
show ip bgp ipv6 unicast dampened-paths — views BGP dampened routes.
debug ip bgp ipv6 unicast soft-reconfiguration
Enable soft-reconfiguration debugging for IPv6 unicast routes.
Syntax
debug ip bgp [ipv4-address | ipv6-address | peer-group-name] ipv6 unicast
soft-reconfiguration
To disable debugging, use the no debug ip bgp [ipv4-address | ipv6-address | peer-
group-name] ipv6 unicast soft-reconfiguration command.
Parameters
ipv4-address |
ipv6-address
Enter the IP address of the neighbor on which you want to enable soft-
reconfiguration debugging.
peer-group-name Enter the name of the peer group on which you want to enable soft-
reconfiguration debugging.
ipv6 unicast Debug soft reconfiguration for IPv6 unicast routes.
Defaults Disabled.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
620 IPv6 Border Gateway Protocol (IPv6 BGP)