White Papers

role receiver-only Enter the keywords role receiver-only to designate the local router to
support graceful restart as a receiver only.
Defaults As above
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
This feature is advertised to BGP neighbors through a capability advertisement. In Receiver Only mode,
BGP saves the advertised routes of peers that support this capability when they restart.
bgp log-neighbor-changes
Enable logging of BGP neighbor resets.
Syntax
bgp log-neighbor-changes
To disable logging, use the no bgp log-neighbor-changes command.
Defaults Enabled.
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The bgp log-neighbor-changes command appears in the show config command output.
Related
Commands
show config — views the current configuration.
bgp non-deterministic-med
Compare MEDs of paths from different autonomous systems (ASs).
Syntax
bgp non-deterministic-med
To return to the default, use the no bgp non-deterministic-med command.
Defaults Disabled (that is, paths/routes for the same destination but from different ASs does not have their MEDs
compared).
Command Modes ROUTER BGP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
IPv6 Border Gateway Protocol (IPv6 BGP) 611