White Papers

Fast-external-fallover enabled
Regular expression evaluation optimization enabled
Capable of ROUTE_REFRESH
For Address Family IPv4 Unicast
BGP table version is 0, main routing table version 0
Distance: external 20 internal 200 local 200
Neighbor(s):
Address : 20.20.20.2
Filter-list in : foo
Route-map in : foo
Weight : 0
Address : 5::6
Weight : 0
Dell#
show ip route
View information, including how they were learned, about the IP routes on the switch.
Syntax
show ip route [hostname | ip-address [mask] [longer-prefixes] | list
prefix-list [process-id] | connected | static | summary]
Parameters
ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view
more detailed information about the route.
mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the
IP address parameter.
longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a
common prefix.
list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list.
process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be
displayed.
connected (OPTIONAL) Enter the keyword connected to view only the directly connected
routes.
static (OPTIONAL) Enter the keyword static to view only routes configured by the ip
route command.
summary (OPTIONAL) Enter the keyword summary.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The following describes the show ip route all command in the following example.
Field Description
(undefined) Identifies the type of route:
● C = connected
● S = static
● R = RIP
● B = BGP
566 IPv4 Routing