White Papers

Example (Private
VLAN)
NOTE: In this example, Line 1 shows community VLAN 200 (in primary VLAN 10) in a PVLAN. Line 2
shows primary VLAN 10.
Dell#show arp
Protocol Address Age(min) Hardware Address Interface VLAN CPU
-----------------------------------------------------------------
Internet 5.5.5.1 - 00:01:e8:43:96:5e - Vl 10 pv 200 CP
Internet 5.5.5.10 - 00:01:e8:44:99:55 - Vl 10 CP
Internet 10.1.2.4 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP
Internet 10.10.10.4 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP
Internet 10.16.127.53 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP
Internet 10.16.134.254 20 00:01:e8:d5:9e:e2 Ma 0/0 - CP
Internet 133.33.33.4 1 00:01:e8:d5:9e:e2 Ma 0/0 - CP
Usage
Information
The following describes the show arp summary command shown in the following example.
Row Heading Description
Total Entries Lists the total number of ARP entries in the ARP table.
Static Entries Lists the total number of configured or static ARP entries.
Dynamic Entries Lists the total number of learned or dynamic ARP entries.
CPU Lists which CPU the entries are stored on.
Example
(Summary)
Dell#show arp summary
TotalEntries Static Entries Dynamic Entries CPU
----------------------------------------------
3 0 3 CP
Dell#
show arp retries
Display the configured number of ARP retries.
Syntax
show arp retries
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Related
Commands
arp retries — sets the number of ARP retries in case the system does not receive an ARP reply in
response to an ARP request.
show hosts
View the host table and DNS configuration.
Syntax
show hosts
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
558 IPv4 Routing