White Papers

Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
clear ip fib stack-unit
Clear all forwarding information base (FIB) entries in the specified stack unit (use this command with caution, refer to Usage
Information.)
Syntax
clear ip fib stack-unit unit-number
Parameters
unit-number Enter the number of the stack unit. The range is from 0 to 5.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To clear Layer 3 CAM inconsistencies, use this command.
CAUTION: Executing this command causes traffic disruption.
Related
Commands
show ip fib stack-unit — shows FIB entries.
clear ip route
Clear one or all routes in the routing table.
Syntax
clear ip route {* | ip-address mask}
Parameters
* Enter an asterisk (*) to clear all learned IP routes.
ip-address mask Enter a specific IP address and mask in dotted decimal format to clear that IP
address from the routing table.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
ip route — assigns an IP route to the switch.
show ip route — views the routing table.
show ip route summary — views a summary of the routing table.
542 IPv4 Routing