White Papers

show vlan
Displays the current VLAN configurations on the switch.
Syntax
show vlan [brief |id vlan-id | name vlan-name]
Parameters
brief (OPTIONAL) Enter the keyword brief to display the following information:
● VLAN ID
● VLAN name (left blank if none is configured.)
● Spanning Tree Group ID
● MAC address aging time
● IP address
id vlan-id (OPTIONAL) Enter the keyword id followed by a number from 1 to 4094. Only
information on the VLAN specified is displayed
name vlan-name (OPTIONAL) Enter the keyword name followed by the name configured for the
VLAN. Only information on the VLAN named is displayed.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The following describes the show vlan command information given in the following example
Column
Heading
Description
(Column 1 — no
heading)
● asterisk symbol (*) = Default VLAN
● G = GVRP VLAN
● P = primary VLAN
● C = community VLAN
● I = isolated VLAN
NUM Displays existing VLAN IDs.
Status Displays the word Inactive for inactive VLANs and the word Active for active
VLANs.
Q Displays G for GVRP tagged, M for member of a VLAN-Stack VLAN, T for tagged
interface, U (for untagged interface), x (uncapitalized x) for Dot1x untagged, or X
(capitalized X) for Dot1x tagged.
Ports
Example
Dell# show vlan id 40
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring
VLANs, P - Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V
- VLT tagged
NUM Status Description Q Ports
1 Inactive a
Dell#
Interfaces 533