White Papers

all ports between 1 and 4, specify the port range as show interfaces
interface-type 1/1 - 4.
● For port–channel interfaces, you can specify multiple ports as port-
range. For example, if you want to display information corresponding to
all ports between 1 and 4, specify the port range as show interfaces
port—channel 1 - 4.
stack-unit unit-id (OPTIONAL) Enter the keywords stack-unit followed by the stack member
number. The range is from 0 to 5.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM and added support to display the interface
configurations corresponding to a range of ports.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
The following describes the show interfaces switchport command for the following example.
Items Description
Name Displays the interface’s type, slot, and port number.
802.1QTagged Displays whether if the VLAN tagged (“True”), untagged (“False”), or hybrid
(“Hybrid”), which supports both untagged and tagged VLANs by port 13/0.
Vlan membership Lists the VLANs to which the interface is a member. Starting with Dell Networking
OS version 7.6.1, this field can display native VLAN membership by port 13/0.
Example
Dell#sh interfaces switchport
Codes: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Trunk, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V
- VLT tagged
Name: TenGigabitEthernet 2/9
802.1QTagged: True
Vlan membership:
Q Vlans
T 1001
Name: TenGigabitEthernet 2/11
802.1QTagged: True
Vlan membership:
Q Vlans
T 1001
Dell#
Related
Commands
show ip interface — displays Layer 3 information about the interfaces.
Interfaces 509