White Papers

Defaults none
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
disable
Disable the resilient ring protocol.
Syntax
disable
To enable the Resilient Ring Protocol, use the no disable command.
Defaults Disabled
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
interface
Configure the primary, secondary, and control-vlan interfaces.
Syntax
interface {primary interface secondary interface control-vlan vlan-id}
To return to the default, use the no interface {primary interface secondary interface
control-vlan vlan-id} command.
Parameters
primary interface Enter the keyword primary to configure the primary interface then one of the
following interfaces and slot/port information:
● Fast Ethernet interface: enter the keyword FastEthernet then the
slot/port information.
● Port Channel interface: enter the keyword port-channel then a
number. The range is from 1 to 128.
● 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
secondary
interface
Enter the keyword secondary to configure the secondary interface then one of
the following interfaces and slot/port information:
● Fast Ethernet interface: enter the keyword FastEthernet then the
slot/port information.
● Port Channel interface: enter the keyword port-channel then a
number. The range is from 1 to 128.
● 10-Gigabit Ethernet interface: enter the keyword
TenGigabitEthernet then the slot/port information
control-vlan
vlan-id
Enter the keyword control-vlan then the VLAN ID. The range is from 1 to
4094.
Defaults none
Force10 Resilient Ring Protocol (FRRP) 457