White Papers

● Topology change Rx and Tx counters
● The number of state change counters
Example
Dell#clear frrp
Clear frrp statistics counter on all ring [confirm] yes
Dell#clear frrp 4
Clear frrp statistics counter for ring 4 [confirm] yes
Dell#
Related
Commands
show frrp — displays the resilient ring protocol configuration.
debug frrp
Clear the FRRP statistics counters.
Syntax
debug frrp {event | packet | detail} [ring-id] [count number]
To disable debugging, use the no debug frrp {event | packet | detail} {ring-id}
[countnumber] command.
Parameters
event Enter the keyword event to display debug information related to ring protocol
transitions.
packet Enter the keyword packet to display brief debug information related to control
packets.
detail Enter the keyword detail to display detailed debug information related to the
entire ring protocol packets.
ring-id (Optional) Enter the ring identification number. The range is from 1 to 255.
count number Enter the keyword count then the number of debug outputs. The range is from 1
to 65534.
Defaults Disabled.
Command Modes CONFIGURATION (conf-frrp)
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Because the resilient ring protocol can potentially transmit 20 packets per interface, restrict debug
information.
description
Enter an identifying description of the ring.
Syntax
description Word
To remove the ring description, use the no description [Word] command.
Parameters
Word Enter a description of the ring. Maximum: 255 characters.
456 Force10 Resilient Ring Protocol (FRRP)