White Papers

Command Modes EXEC Privilege
Supported Modes All Modes
Default None
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
debug ip dhcp client packets
Enable the display of log messages for all DHCP packets sent and received on DHCP client interfaces.
Syntax
debug ip dhcp client packets [interface type slot/port]
Parameters
interface type
slot/port
Display log messages for DHCP packets sent and received on the specified
interface.
● For the management interface on the stack-unit, enter the keyword
managementethernet followed by slot/port information. The slot and port
range is 0
● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Command Modes EXEC Privilege
Supported Modes All Modes
Default None
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
release dhcp interface
Release the dynamically-acquired IP address on an Ethernet interface while retaining the DHCP client configuration on the
interface.
Syntax
release dhcp interface type slot/port
Parameters
interface type
slot/port
● For the management interface on the stack-unit, enter the keyword
management ethernet followed by slot/port information. The slot and port
range is 0.
● For a VLAN, enter the keyword vlan followed by a number from 1 to 4094.
Command Modes EXEC Privilege
Supported Modes All Modes
Default None
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
406 Dynamic Host Configuration Protocol