White Papers

Parameters
days Enter the number of days of the lease. The range is from 0 to 31.
hours Enter the number of hours of the lease. The range is from 0 to 23.
minutes Enter the number of minutes of the lease. The range is from 0 to 59.
infinite Specify that the lease never expires.
Defaults 24 hours
Command Modes DHCP <POOL>
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
netbios-name-server
Specify the NetBIOS windows internet naming service (WINS) name servers, in order of preference, that are available to
Microsoft dynamic host configuration protocol (DHCP) clients.
Syntax
netbios-name-server address [address2...address8]
Parameters
address Enter the address of the NETBIOS name server. You may enter up to eight, in order
of preference.
Defaults none
Command Modes DHCP <POOL>
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
netbios-node-type
Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking Operating System (OS) recommends specifying
clients as hybrid.
Syntax
netbios-node-type type
Parameters
type Enter the NETBIOS node type:
● Broadcast: Enter the keyword b-node.
● Hybrid: Enter the keyword h-node.
● Mixed: Enter the keyword m-node.
● Peer-to-peer: Enter the keyword p-node.
Defaults Hybrid
Command Modes DHCP <POOL>
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
402 Dynamic Host Configuration Protocol