White Papers

• priority
• priority-group bandwidth pfc
• priority-pgid
• qos-policy-output ets
• qos-policy-buffer
• priority-list
• scheduler
• show dcb
• show interface dcbx detail
• show interface ets
• show interface pfc
• show interface pfc statistics
• show qos priority-groups
• show qos dcb-map
• show stack-unit stack-ports ets details
• dcb pfc-shared-buffer-size
• dcb pfc-total-buffer-size
• dcb-buffer-threshold
• dcb enable pfc-queues
• dcb {ets | pfc} enable
• service-class buffer shared-threshold-weight
• show stack-unit stack-ports pfc details
advertise dcbx-appln-tlv
On a DCBX port with a manual role, configure the application priority TLVs advertised on the interface to DCBX peers.
Syntax
advertise dcbx-appln-tlv {fcoe | iscsi}
To remove the application priority TLVs, use the no advertise dcbx-appln-tlv {fcoe |
iscsi} command.
Parameters
{fcoe | iscsi} Enter the application priority TLVs, where:
● fcoe: enables the advertisement of FCoE in application priority TLVs.
● iscsi: enables the advertisement of iSCSI in application priority TLVs.
Defaults Application priority TLVs are enabled to advertise FCoE and iSCSI.
Command Modes PROTOCOL LLDP
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Introduced on the M I/O Aggregator.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To disable TLV transmission, use the no form of the command; for example, no advertise dcbx-
appln-tlv iscsi.
Data Center Bridging (DCB) 359