White Papers

redistributed
n - network, D - denied, S - stale
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
D 70.70.21.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.22.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.23.0/24 100.10.10.2 0 0 100 200 ?
D 70.70.24.0/24 100.10.10.2 0 0 100 200 ?
Dell#
Related
Commands
show ip bgp — views the current BGP routing table.
show ip bgp next-hop
View all next hops (using learned routes only) with current reachability and flap status. This command only displays one path,
even if the next hop is reachable by multiple paths.
Syntax
show ip bgp next-hop
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip bgp next-hop command shown in the following example.
Field Description
Next-hop Displays the next-hop IP address.
Via Displays the IP address and interface used to reach the next hop.
RefCount Displays the number of BGP routes using this next hop.
Cost Displays the cost associated with using this next hop.
Flaps Displays the number of times the next hop has flapped.
Time Elapsed Displays the time elapsed since the next hop was learned. If the route is down, this
field displays time elapsed since the route went down.
Example
Dell>show ip bgp next-hop
Next-hop Via RefCount Cost Flaps Time Elapsed
63.114.8.33 63.114.8.33, Gi 12/22 240984 0 0 00:18:25
63.114.8.34 63.114.8.34, Gi 12/22 135152 0 0 00:18:13
63.114.8.35 63.114.8.35, Gi 12/22 1 0 0 00:18:07
63.114.8.60 63.114.8.60, Gi 12/22 135155 0 0 00:18:11
Dell>
show ip bgp paths
View all the BGP path attributes in the BGP database.
Syntax
show ip bgp paths [regexp regular-expression]
320 Border Gateway Protocol IPv4 (BGPv4)