White Papers

AfNetBKDRCnt 0 : AfDampHLife 0
AfDampReuse 0 : AfDampSupp 0 : AfDampMaxHld 0 : AfDampCeiling 0 :
AfDampRmapP
show ip bgp extcommunity-list
View information on all routes with Extended Community attributes.
Syntax
show ip bgp [ipv4 unicast] extcommunity-list [list name]
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related
to ipv4 unicast routes.
list name Enter the extended community list name you wish to view. The range is 140
characters.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To view the total number of COMMUNITY attributes found, use the show ip bgp summary command.
The text line above the route table states the number of COMMUNITY attributes found.
The show ip bgp community command without any parameters lists BGP routes with at least one
BGP community attribute and the output is the same as for the show ip bgp command output.
show ip bgp filter-list
View the routes that match the filter lists.
Syntax
show ip bgp [ipv4 unicast] filter-list as-path-name
Parameters
ipv4 unicast (OPTIONAL) Enter the keywords ipv4 unicast to view information only related
to ipv4 unicast routes.
as-path-name Enter an AS-PATH access list name. The range is 140 characters.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ip bgp filter-list hello command shown in the following
example.
Field Description
Path source
codes
Lists the path sources shown to the right of the last AS number in the Path
column:
Border Gateway Protocol IPv4 (BGPv4) 313