White Papers

Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show debugging — view enabled debugging operations.
show ip bgp dampened-paths — view BGP dampened routes.
debug ip bgp events
Display information on local BGP state changes and other BGP events.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] events [in | out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name] events command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only events on inbound BGP messages.
out (OPTIONAL) Enter the keyword out to view only events on outbound BGP
messages.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To remove all configured debug commands for BGP, enter the no debug ip bgp command.
debug ip bgp keepalives
Display information about BGP keepalive messages.
Syntax
debug ip bgp [ip-address | peer-group peer-group-name] keepalives [in |
out]
To disable debugging, use the no debug ip bgp [ip-address | peer-group peer-group-
name] keepalives [in | out] command.
Parameters
ip-address (OPTIONAL) Enter the IP address of the neighbor in dotted decimal format.
peer-group peer-
group-name
(OPTIONAL) Enter the keyword peer-group then the name of the peer group.
in (OPTIONAL) Enter the keyword in to view only inbound keepalive messages.
out (OPTIONAL) Enter the keyword out to view only outbound keepalive messages.
Command Modes EXEC Privilege
280 Border Gateway Protocol IPv4 (BGPv4)