White Papers

match tag
To redistribute only routes that match a specified tag value, configure a filter.
Syntax
match tag tag-value
Parameters
tag-value Enter a value as the tag on which to match. The range is from zero (0) to
4294967295.
Defaults Not configured.
Command Modes ROUTE-MAP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
match interface — redistributes routes that match the next-hop interface.
match ip address — redistributes routes that match an IP address.
match ip next-hop — redistributes routes that match the next-hop IP address.
match ip route-source — redistributes routes that match routes advertised by other routers.
match metric — redistributes routes that match a specific metric.
match route-type — redistributes routes that match a route type.
route-map
Enable a route map statement and configure its action and sequence number. This command also places you in ROUTE-MAP
mode.
Syntax
route-map map-name [permit | deny] [sequence-number]
Parameters
map-name Enter a text string of up to 140 characters to name the route map for easy
identification.
permit (OPTIONAL) Enter the keyword permit to set the route map default as permit. If
you do not specify a keyword, the default is permit.
deny (OPTIONAL) Enter the keyword deny to set the route map default as deny.
sequence-
number
(OPTIONAL) Enter a number to identify the route map for editing and sequencing
with other route maps. You are prompted for a sequence number if there are
multiple instances of the route map. The range is from 1 to 65535.
Defaults Not configured.
If you do not define a keyword (permit or deny) for the route map, the permit action is the default.
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence number, all route maps
with the same map-name are deleted when you use the no route-map map-name command.
Access Control Lists (ACL) 187