White Papers

ManualsBrandsDell ManualsAccess PlatformsOS9

161

162

163

164

165

166

167

168

169

170

Table Of Contents

Commands

mac access-list standard — configures a standard MAC ACL.

mac access-list extended — configures an extended MAC ACL.

show mac access-lists

Display all of the Layer 2 ACLs configured in the system, whether or not they are applied to an interface, and the count of

matches/mismatches against each ACL entry displayed.

Syntax

show mac access-lists [access-list-name] [interface interface] [in | out]

Parameters

access-list-name

Enter the name of a configured MAC ACL, up to 140 characters.

interface

Enter the keyword interface then the one of the following keywords and slot/

port or number information:

● For a Port Channel interface, enter the keywords port-channel and then

enter a number. The range is from 1 to 128.

● For a 10-Gigabit Ethernet interface, enter the keyword

TenGigabitEthernet and then enter the slot/port information.

● For a VLAN interface enter the keyword VLAN and then the vlan id.

in | out Identify whether ACL is applied on ingress or egress side.

Command Modes EXEC Privilege

Supported Modes Full–Switch

Command

History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

show mac accounting access-list

Display MAC access list configurations and counters (if configured).