White Papers

● EXEC privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.2(0.0) Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
To display CoS mapping information only for the specified supplicant, enter a supplicant’s MAC address
using the mac-address option.
You can display the CoS mapping information applied to traffic from authenticated supplicants on 802.1X-
enabled ports that are in Single-Hot, Multi-Host, and Multi-Supplicant authentication modes.
Example
Dell#show dot1x cos-mapping interface tengigabitethernet 0/1
802.1p CoS re-map table on Te 0/1:
----------------------------------
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
Dell#
Dell#show dot1x cos-mapping interface tengigabitethernet 0/1 mac-address
00:00:00:00:00:10
Supplicant Mac: 0 0 0 0 0 10 Lookup for Mac:
802.1p CoS re-map table on Te 0/1:
----------------------------------
802.1p CoS re-map table for Supplicant: 00:00:00:00:00:10
Dot1p Remapped Dot1p
0 7
1 6
2 5
3 4
4 3
5 2
6 1
7 0
Dell#
show dot1x interface
Display the 802.1X configuration of an interface.
Syntax
show dot1x interface interface [mac-address mac-address]
Parameters
interface Enter one of the following keywords and slot/port or number information:
● For a Ten-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
mac-address (Optional) MAC address of a supplicant.
Defaults none
Command Modes
● EXEC
● EXEC privilege
136 802.1X