White Papers

● show hardware stack-unit
● show hardware system-flow
clear hardware stack-unit
Clear statistics from selected hardware components.
Syntax
clear hardware stack-unit 0–5 {counters | unit 0–1 counters | cpu data-
plane statistics | stack-port 9–12}
Parameters
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a particular stack member
and then enter one of the following command options to clear a specific collection
of data.
counters Enter the keyword counters to clear the counters on the selected stack member.
unit 0–0
counters
Enter the keyword unit along with a port-pipe number, from 0 to 1 , then the
keyword counters to clear the counters on the selected port-pipe.
cpu data-plane
statistics
Enter the keywords cpu data-plane statistics to clear the data plane
statistics.
stack-port 9–12 Enter the keywords stack-port then the port number of the stacking port to
clear the statistics of the particular stacking port. The range is from 9 to 12.
NOTE: You can identify stack port numbers by physical inspection of the rear
modules. The numbering is the same as for the 10G ports. You can also inspect
the output of the show system stack-ports command.
Defaults none
Command Modes EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
Related
Commands
show diag — displays the data plane or management plane input and output statistics of the designated
component of the designated stack member.
clear hardware system-flow
Clear system-flow statistics from selected hardware components.
Syntax
clear hardware system-flow layer2 stack-unit 0–5 port-set 0–0 counters
Parameters
stack-unit 0–5 Enter the keywords stack-unit then 0 to 5 to select a particular stack member
and then enter one of the following command options to clear a specific collection
of data.
port-set 0–0
counters
Enter the keywords port-set along with a port-pipe number, then the keyword
counters to clear the system-flow counters on the selected port-pipe.
Defaults none
Command Modes EXEC Privilege
Supported Modes Full–Switch
Debugging and Diagnostics 1245