White Papers

Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
This command enables XML input mode where you can either cut and paste XML requests or enter the
XML requests line-by-line.
trace route
View the packet path to a specific device.
Syntax
traceroute {host | ip-address}
Parameters
host
Enter the name of device.
ip-address Enter the IP address of the device in dotted decimal format.
Defaults Timeout = 5 seconds; Probe count = 3; 30 hops max; 40 byte packet size; UDP port = 33434
Command Modes
● EXEC
● EXEC Privilege
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
8.3.17.0 Supported on the M I/O Aggregator.
Usage
Information
When you enter the traceroute command without specifying an IP address (Extended Traceroute), you
are prompted for a target and source IP address, timeout in seconds (default is 5), a probe count (default
is 3), minimum TTL (default is 1), maximum TTL (default is 30), and port number (default is 33434). To
keep the default setting for those parameters, press the ENTER key.
Example (IPv4)
Dell#traceroute www.force10networks.com
Translating "www.force10networks.com"...domain server (10.11.0.1)
[OK]
Type Ctrl-C to abort.
---------------------------------------------------
Tracing the route to www.force10networks.com (10.11.84.18),
30 hops max, 40 byte packets
----------------------------------------------------
TTL Hostname Probe1 Probe2 Probe3
1 10.11.199.190 001.000 ms 001.000 ms 002.000 ms
2 gwegress-sjc-02.force10networks.com (10.11.30.126)
005.000 ms 001.000 ms 001.000 ms
3 fw-sjc-01.force10networks.com (10.11.127.254)
000.000 ms 000.000 ms 000.000 ms
4 www.force10networks.com (10.11.84.18)
000.000 ms 000.000 ms 000.000 ms
Dell#
Related
Commands
undebug all
Disable all debug operations on the system.
Syntax
undebug all
124 Control and Monitoring