White Papers

show config
View the non-default VRRP configuration.
Syntax
show config [verbose]
Parameters
verbose (OPTIONAL) Enter the keyword verbose to view all VRRP group configuration
information, including defaults.
Command Modes VRRP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell(conf-if-vrid-4)#show con
vrrp-group 4
virtual-address 119.192.182.124
!
show vrrp
View the VRRP groups that are active. If no VRRP groups are active, the system returns No Active VRRP group.
Syntax
show vrrp [vrrp-id] [interface] [brief]
Parameters
vrrp-id (OPTIONAL) Enter the Virtual Router Identifier for the VRRP group to view only
that group. The range is from 1 to 255.
interface (OPTIONAL) Enter the following keywords and slot/port or number information:
● For Port Channel interface types, enter the keywords port-channel then the
number. The range is from 1 to 128.
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
● For a VLAN interface, enter the keyword vlan then the VLAN ID. The VLAN ID
range is from 1 to 4094.
brief (OPTIONAL) Enter the keyword brief to view a table of information on the VRRP
groups.
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show vrrp brief command shown in the following example.
Item Description
Interface Lists the interface type, slot and port on which the VRRP group is configured.
Grp Displays the VRRP group ID.
Virtual Router Redundancy Protocol (VRRP) 1219