White Papers

centisecs
centisecs
Enter the keyword centisecs followed by the number of centisecs in multiple of
25 centisecs. The range is 25 to 4075 centisecs in multiples of 25 centisecs.
Defaults 1 second or 100 centisecs
Command Modes INTERFACE-VRRP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced the support for centisecs on the MXL 10/40GbE Switch .
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
Dell Networking OS recommends keeping the default setting for this command. If you do change the time
interval between VRRP advertisements on one router, change it on all routers.
authentication-type
Enable authentication of VRRP data exchanges.
Syntax
authentication-type simple [encryption-type] password
To delete an authentication type and password, use the no authentication-type command.
Parameters
simple Enter the keyword simple to specify simple authentication.
encryption-type (OPTIONAL) Enter one of the following numbers:
● 0 (zero) specifies an un-encrypted authentication data follows.
● 7 (seven) specifies a hidden authentication data follows.
password Enter a character string up to eight characters long as a password. If you do not
enter an encryption-type, the password is stored as clear text.
Defaults Not configured.
Command Modes VRRP
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The given password is encrypted by the system and the show config displays an encrypted text string
for any of the encrypted typed used.
clear counters vrrp
Clear the counters maintained on VRRP operations.
Syntax
clear counters vrrp [vrrp-id]
Parameters
vrrp-id (OPTIONAL) Enter the number of the VRRP group ID. The range is from 1 to 255.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Virtual Router Redundancy Protocol (VRRP) 1215