White Papers

Virtual Router Redundancy Protocol (VRRP)
Virtual router redundancy protocol (VRRP) is supported by the Dell Networking Operating System (OS) for IPv4 and IPv6.
The following commands apply to both VRRP IPv4 and IPv6:
● advertise-interval
● description
● disable
● hold-time
● preempt
● priority
● show config
● track
● virtual-address
VRRP Ipv6 are in the VRRP for IPv6 Commands section.
Topics:
• advertise-interval
• authentication-type
• clear counters vrrp
• debug vrrp
• description
• disable
• hold-time
• preempt
• priority
• show config
• show vrrp
• track
• virtual-address
• vrrp delay minimum
• vrrp delay reload
• vrrp-group
• VRRP for IPv6 Commands
• clear counters vrrp ipv6
• debug vrrp ipv6
• show vrrp ipv6
• vrrp-ipv6-group
• version
advertise-interval
Set the time interval between VRRP advertisements.
Syntax
advertise-interval {seconds | centisecs centisecs}
To return to the default settings, use the no advertise-interval command.
Parameters
seconds Enter a number of seconds. The range is from 1 to 255. The default is 1 second.
66
1214 Virtual Router Redundancy Protocol (VRRP)