White Papers

vlt-peer-lag port-channel
Associate the port channel to the corresponding port channel in the VLT peer for the VLT connection to an attached device.
Syntax
vlt-peer-lag port-channel id-number
Parameters
id-number Enter the respective vlt port-channel number of the peer device.
Defaults Not configured.
Command Modes INTERFACE PORT-CHANNEL
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Supported on the M I/O Aggregator.
show vlt private-vlan
Display the association of private VLAN (PVLAN) with the VLT LAG. You can configure VLT peer nodes in a PVLAN on the
switch.
Syntax
show vlt private-vlan
Command Modes EXEC
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.3(0.0) Introduced on the MXL 10/40GbE Switch IO Module platform.
Usage
Information
If you add an ICL or VLTi link as a member of a primary VLAN, the ICL becomes a part of the
primary VLAN and its associated secondary VLANs, similar to the behavior for normal trunk ports. VLAN
symmetricity is not validated if you associate an ICL to a PVLAN. Similarly, if you dissociate an ICL from
a PVLAN, although the PVLAN symmetrictiy exists, ICL is removed from that PVLAN in such a case. The
ICL Status field denotes the type of the VLAN port of the VLTi link configured in a PVLAN.
Example
Dell#Show vlt private-vlan vlan-id
Codes: C- Community, I – Isolated, V – Internally tagged, T – tagged, *
- VLT Pvlan
Primary Secondary ICL Status
10 V (*)
20(C) V
30 (I) V
40 T
50(C) T
60 (I) T
Dell#
Virtual Link Trunking (VLT) 1213