White Papers

To remove use the no delay-restore abort-threshold command.
Defaults 60 seconds
Command Modes VLT DOMAIN
Supported Modes Full–Switch
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.7(0.0) Introduced on Supported on the MXL 10/40GbE Switch IO Module.
Parameter
Enter the value (in seconds) to specify the time interval for delay restore timer to abort. This timer is
applicable only during reload/boot-up and not in other scenarios (example, ICL flap).
The range is from 1 to 1800 seconds.
Usage
Information
To abort VLT delay restore timer as the maximum threshold, the maximum time interval is applied to hold
down ICL peer-up in the start-up configurations during the reload.
lacp ungroup member-independent
Prevent possible loop during the bootup of a VLT peer switch or a device that accesses the VLT domain.
Syntax
lacp ungroup member-independent {vlt | port-channel}
Parameters
port-channel Force all LACP port-channel members to become switchports.
vlt Force all VLT LACP members to become switchports.
Defaults Not configured.
Command Modes CONFIGURATION
Supported Modes Programmable-Mux (PMUX)
Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.2(0.0) Supported on the M I/O Aggregator.
Usage
Information
LACP on the VLT ports (on a VLT switch or access device), which are members of the virtual link trunk, is
not brought up until the VLT domain is recognized on the access device.
To ungroup the VLT and port-channel configurations, use the no lacp ungroup member independent
command on a VLT port channel, depending on whether the port channel is VLT or non-VLT.
Example
Dell(conf)#lacp ungroup member-independent ?
port-channel LACP port-channel members become switchports
vlt All VLT LACP members become
switchports
1202 Virtual Link Trunking (VLT)