White Papers

Type Version Target checksum
boot selector 4.1.0.1 Control Processor passed
CPLD IMAGE INFORMATION :
---------------------------------------------------------------------
Card CPLD Name Version
Stack-unit 0 IOM SYSTEM CPLD 9
----------------------------------- show revision
-------------------------------
-- Stack unit 1 --
IOM SYSTEM CPLD : 9
------------------------------------ show clock
-------------------------------
10:59:34.047 UTC Thu Jul 5 2018
<output truncated for brevity>
Example (show
tech-support
stack-unit)
Dell#show tech-support stack-unit 1
----------------------------------- show version
-------------------------------
Dell Networking Real Time Operating System Software
Dell Networking Operating System Version: 1.0
Dell Networking Application Software Version: E8-3-17-38
Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved.
Build Time: Thu Jul 19 05:59:59 PDT 2012
Build Path: /sites/sjc/work/swsystems01-2/ravisubramani/
ravis-8317/SW/SRC/Cp_src/
Tacacs
FTOS uptime is 4 day(s), 7 hour(s), 14 minute(s)
System image file is "dv-m1000e-2-b2"
System Type: I/O-Aggregator
Control Processor: MIPS RMI XLP with 2147483648 bytes of memory.
256M bytes of boot flash memory.
1 34-port GE/TE (XL)
56 Ten GigabitEthernet/IEEE 802.3 interface(s)
------------------------------------ show clock
-------------------------------
17:49:37.2 UTC Mon Jul 23 2012
----------------------------------- show running-config
------------------------
Current Configuration ...
! Version E8-3-17-38
! Last configuration change at Mon Jul 23 17:10:18 2012 by default
!
boot system stack-unit 1 primary tftp://10.11.9.21/dv-m1000e-2-b2
boot system stack-unit 1 default system: A:
boot system gateway 10.11.209.62
!
redundancy auto-synchronize full
!
service timestamps log datetime
!
hostname FTOS
----------------------------------- show ip management route
-------------------
Destination Gateway State
----------- ------- -----
1
--More--
Dell#
Related
Commands
show version — displays the Dell Networking OS version.
show system — displays the current switch status..
show environment — displays system component status.
show processes memory — displays memory usage based on the running processes.
Control and Monitoring 119