White Papers

10.16.127.86 0 10.16.127.26 5 9 16 1 65.292 13829.9
0.002
10.16.127.144 0 10.16.127.26 5 6 16 1 0.829 13795.2
0.002
10.16.127.44 0 10.16.127.26 5 - 16 1 0.799 13791.5
0.002
* master (synced), # backup, + selected, - outlier, x falseticker
Dell EMC#
Related
Commands
show ntp status — displays the current NTP status.
show ntp vrf associations
Displays the NTP servers configured for the VRF instance <vrf-name>.
Syntax show ntp [vrf] <vrf-name> associations.
Command Modes
EXEC
EXEC Privilege
Supported Modes Full–Switch
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6(0.0) Added support for VRF.
9.4.(0.0) Added support for VRF.
show ntp status
Display the current NTP status.
Syntax
show ntp status
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following describes the show ntp status command shown in the following example.
Field Description
“Clock is...” States whether the switch clock is synchronized, which NTP stratum the system is
assigned and the IP address of the NTP peer.
“frequency is...” Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the
clock in this system.
“reference time
is...”
Displays the reference time stamp.
1166 System Time