White Papers

Version Description
8.3.17.0 Supported on the M I/O Aggregator.
Related
Commands
clock summer-time date — sets a date (and time zone) on which to convert the switch to daylight saving
time on a one-time basis.
show clock — displays the current clock settings.
debug ntp
Display network time protocol (NTP) transactions and protocol messages for troubleshooting.
Syntax
debug ntp {level level-number}
To disable debugging of NTP transactions, use the no debug ntp {level level-number}
command.
Parameters
level level-
number
Enter the keyword level then the level–number to display information about NTP
logs. The log level range is from 1 to 6.
● 1 is the most important log level.
● 6 is the least important log level.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.14(0.0) Introduced on the C9010, FN–IOM, MIOA, MXL, S3048–ON, S4048–ON, S4048T-
ON, S5048F-ON, S6000, S6000–ON, S6010-ON, S6100–ON, and Z9100–ON.
ntp offset-threshold
Configure the threshold time interval before which the system generates an NTP audit log message if the time difference from
the NTP server is greater than a threshold value (offset-threshold).
Syntax
ntp offset-threshold threshold-value
To disable the threshold value, use the no ntp offset-threshold command.
Parameters
offset-threshold
threshold-value
(Optional) Enter the keyword offset-threshold and then the threshold value.
The range is from 0 to 999.
Defaults Zero (0).
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S3038–ON, S4048-ON, S3100 Series, S4810P, S4820T, S5000,
S6000, S6000–ON, S6100–ON, Z9500, and Z9100–ON.
Usage
Information
The ntp offset-threshold command does not time synchronization.
System Time 1159