White Papers

Full–Switch Mode
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
show storm-control broadcast
Display the storm control broadcast configuration.
Syntax
show storm-control broadcast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface-specific
storm control configuration:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch Mode
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Example
Dell#show storm-control broadcast tengigabitethernet 3/8
Broadcast storm control configuration
Interface Direction Packets/Second
----------------------------------------
TenGig 3/8 Ingress 1000
Dell#
show storm-control multicast
Display the storm control multicast configuration.
Syntax
show storm-control multicast [interface]
Parameters
interface (OPTIONAL) Enter one of the following interfaces to display the interface specific
storm control configuration:
● For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet then the slot/port information.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch Mode
1124 Storm Control