White Papers

Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator.
Usage
Information
This command is supported on the M I/O, FN410S, and FN410T Aggregators.
The following describes the show interfaces command shown in the following example.
Field Description
Topology Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone.
Interface The unit/port ID of the connected stack port on this unit.
Link Speed Link Speed of the stack port (10) in Gb/s.
Admin Status The only currently listed status is Up.
Connection The stack port ID to which this unit’s stack port is connected.
Example
Dell# show system stack-ports
Topology: Ring
Interface Connection Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/9 10 up down
0/10 1/10 10 up up
1/9 10 up down
1/10 0/10 10 up up
Dell#
Example (Status)
Dell# show system stack-ports status
Topology: Daisy chain
Interface Link Speed Admin Link Trunk
(Gb/s) Status Status Group
0/9 10 up down
0/10 10 up up
1/9 10 up down
1/10 10 up up
Example
(Topology)
Dell# show system stack-ports topology
Topology: Daisy chain
Interface Connection Trunk
Group
0/9
0/9 1/10
1/10
1/10 0/10
Dell #
Related
Commands
power-cycle stack-unit—resets the designated stack member.
show diag— displays the data plane or management plane input and output statistics of the designated
component of the designated stack member.
show system—displays the current status of all stack members or a specific member.
1116 Stacking Commands