White Papers

Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
clear logging — clears the logging buffer.
default logging console — returns the logging console parameters to the default setting.
show logging — displays the logging setting and system messages in the internal buffer.
logging facility
Configure the Syslog facility used for error messages sent to Syslog servers.
Syntax
logging facility [facility-type]
To return to the default values, use the no logging facility command.
Parameters
facility-type (OPTIONAL) Enter one of the following parameters:
● auth (authorization system)
● cron (Cron/at facility)
● deamon (system deamons)
● kern (kernel)
● local0 (local use)
● local1 (local use)
● local2 (local use)
● local3 (local use)
● local4 (local use)
● local5 (local use)
● local6 (local use)
● local7 (local use)
● lpr (line printer system)
● mail (mail system)
● news (USENET news)
● sys9 (system use)
● sys10 (system use)
● sys11 (system use)
● sys12 (system use)
● sys13 (system use)
● sys14 (system use)
● syslog (Syslog process)
● user (user process)
● uucp (Unix to Unix copy process)
The default is local7.
Defaults
local7
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
1104 Simple Network Management Protocol (SNMP) and Syslog