White Papers

Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
logging console — sets the logging console parameters.
logging extended
Logs security and audit events to a system log server.
Syntax
logging extended
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced on the MXL.
Usage
Information
This command is available with or without RBAC enabled. When RBAC is enabled you can restrict access
to audit and security logs based on the CLI sessions’ user roles. If extended logging is disabled, you can
only view system events, regardless of RBAC user role.
When you enabled RBAC and extended logging:
● Only the system administrator role can execute this command.
● The system administrator and system security administrator roles can view security events and system
events.
● The system administrator role can view audit, security, and system events.
●
The network administrator and network operator roles can view system events.
Examples
Dell(conf)#logging extended
Related
Commands
show logging auditlog — displays audit log, clear logging auditlog — clears audit log
default logging monitor
Return to the default settings for messages logged to the terminal.
Syntax
default logging monitor
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Simple Network Management Protocol (SNMP) and Syslog 1101