White Papers

Usage
Information
If the interface is expected to flap during normal usage, you could disable this command.
Syslog Commands
The following commands allow you to configure logging functions on all Dell Networking switches.
clear logging
Clear the messages in the logging buffer.
Syntax
clear logging
Defaults none
Command Modes EXEC Privilege
Supported Modes Full–Switch Mode
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show logging — displays logging settings and system messages in the internal buffer.
default logging buffered
Return to the default setting for messages logged to the internal buffer.
Syntax
default logging buffered
Defaults size = 40960; level = 7 or debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
default logging buffered — sets the logging buffered parameters.
default logging console
Return the default settings for messages logged to the console.
Syntax
default logging console
Defaults level = 7 or debugging
Command Modes CONFIGURATION
Supported Modes Full–Switch Mode
1100 Simple Network Management Protocol (SNMP) and Syslog