White Papers

Related
Commands
snmp-server engineID — configures local and remote SNMP engines on the router.
show snmp group
Display the group name, security model, status, and storage type of each group.
Syntax
show snmp group
Command Modes
● EXEC
● EXEC Privilege
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage
Information
The following Example displays a group named ngroup. The ngroup has a security model of version 3 (v3)
with authentication (auth), the read and notify name is nview with no write view name specified, and
finally the row status is active.
Example
Dell#show snmp group
groupname: ngroup security model: v3 auth
readview : nview writeview: no write view specified
notifyview: nview
row status: active
Dell#
Related
Commands
snmp-server group — configures an SNMP server group.
show snmp supported-mibs
Display the list of SNMP MIBs supported by the platform.
Syntax
show snmp supported-mibs
Command Modes
● EXEC
● EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.14(0.0) Introduced on the C9010, FN-IOM, MIOA, MXL, S3048–ON, S3100, S4048–ON,
S4048T-ON, S5048F-ON, S6000, S6000–ON, S6010–ON, S6100–ON and Z9100–
ON.
Example
DellEMC#show snmp supported-mibs
MIB OID
---------------------------------------------------------
RFC1155-SMI -
RFC-1212 -
SNMPv2-SMI -
SNMPv2-TC -
SNMPv2-CONF -
INET-ADDRESS-MIB -
IANAifType-MIB -
Simple Network Management Protocol (SNMP) and Syslog 1085