White Papers

Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
ip dhcp snooping binding
Create a static entry in the DHCP binding table.
Syntax
[no] ip dhcp snooping binding mac address vlan-id vlan-id ip ip-address
interface type slot/port lease number
Parameters
mac address Enter the keyword mac then the MAC address of the host to which the server is
leasing the IP address.
vlan-id vlan-id Enter the keywords vlan-id then the VLAN to which the host belongs. The range
is from 2 to 4094.
ip ip-address Enter the keyword ip then the IP address that the server is leasing.
interface type
Enter the keyword interface then the type of interface to which the host is
connected.
● For a ten-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
slot/port Enter the slot and port number of the interface.
lease time Enter the keyword lease then the amount of time the IP address is leased. The
range is from 1 to 4294967295.
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Related
Commands
show ip dhcp snooping — displays the contents of the DHCP binding table.
ip dhcp snooping database renew
Renew the binding table.
Syntax
ip dhcp snooping database renew
Defaults none
Command Modes
● EXEC
● EXEC Privilege
Supported Modes Full–Switch
1062 Security