White Papers

exec for EXEC mode
interface for INTERFACE modes
line for LINE mode
route-map for Route-map mode
router for Router mode
addrole Enter the keyword addrole to add permission to the command. You cannot add
or delete rights for the sysadmin role.
deleterole
Enter the keyword deleterole to remove access to the command. You cannot add
or delete rights for the sysadmin role.
role-name Enter a text string for the name of the user role up to 63 characters. These are 3
system defined roles you can modify: secadmin, netadmin, and netoperator.
reset Enter the keyword reset to reset all roles back to default for that command.
command Enter the command’s keywords to assign the command to a certain access level.
You can enter one or more keywords.
Defaults none
Command Modes CONFIGURATION
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.5(0.0) Introduced on the MXL.
Related
Commands
userrole
rate-limit
Configure NAS to allow or reject RADIUS dynamic authorization (DA) packets based on the configurable rate limit value.
Syntax
rate-limit packets per minute
To undo the configuration, enter the no rate-limit command.
Defaults 30 packets per minute.
Parameters
packet per
minute
Enter the number of packets that you want processed per minute. The range is
between 10 to 60 packets per minute.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● Packets are dropped after number of packets reaches the configured rate-limit.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and
MXL.
1040 Security