White Papers

To disable debugging of RADIUS, use the no debug radius command.
Defaults Disabled.
Command Modes EXEC Privilege
Supported Modes Full–Switch
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
da-rsp-timeout
Configure timeout value for the back end task to respond to DAC requests.
Syntax
da-rsp-timeout minutes
To undo the configuration, enter the no da-rsp-timeout command.
Defaults 10 Minutes.
Parameters
minutes Enter the time out value.
Command Modes
● CONF-DYNAMIC-AUTH
Usage
Information
● Time for DAS to wait before the back end response is received.
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
9.13(0.0) Introduced on the C9010, S3100, S3048–ON, S4048T-ON, S4048–ON, S5000,
S6010–ON, S6000–ON, S6100–ON, S6000, Z9100–ON, Z9500, FN-IOM, and
MXL.
disconnect-user
Configure NAS to allow or reject DM requests corresponding to AAA users-sessions coming from the DAC.
Syntax
disconnect-user
To undo this configuration, enter the no disconnect-user command.
Defaults Enabled.
Command Modes
● CONF-DYNAMIC-AUTH
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
The following is a list of the Dell EMC Networking OS version history for this command.
Version Description
9.14(1.0) Introduced on the S4810 and S4820T.
1034 Security