White Papers

Example
Dell#show accounting
Active accounted actions on tty2, User admin Priv 1
Task ID 1, EXEC Accounting record, 00:00:39 Elapsed, service=shell
Active accounted actions on tty3, User admin Priv 1
Task ID 2, EXEC Accounting record, 00:00:26 Elapsed, service=shell
Dell#
Related
Commands
aaa accounting — enables AAA Accounting and creates a record for monitoring the accounting function.
Authentication and Password Commands
This section contains the commands that control the management access to the system.
aaa authentication enable
Configure AAA Authentication method lists for user access to EXEC privilege mode (the “Enable” access).
Syntax
aaa authentication enable {default | method-list-name} method [... method2]
To return to the default setting, use the no aaa authentication enable {default |
method-list-name} method [... method2] command.
Parameters
default Enter the keyword default then the authentication methods to use as the default
sequence of methods for the Enable login. The default is default enable.
method-list-
name
Enter a text string (up to 16 characters long) to name the list of enabled
authentication methods activated at login.
method Enter one of the following methods:
● enable: use the password the enable password command defines in
CONFIGURATION mode.
● line: use the password the password command defines in LINE mode.
● none: no authentication.
● radius: use the RADIUS servers configured with the radius-server host
command.
● tacacs+: use the TACACS+ server(s) configured with the tacacs-server
host command.
... method2 (OPTIONAL) In the event of a “no response” from the first method, Dell
Networking Operating System (OS) applies the next configured method.
Defaults Use the enable password.
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
Version Description
9.9(0.0) Introduced on the FN IOM.
9.4(0.0) Supported on the FN I/O Aggregator.
9.3(0.0) Supported on the M I/O Aggregator.
Usage
Information
By default, the Enable password is used. If you configure aaa authentication enable
default, Dell Networking Operating System (OS) uses the methods defined for Enable access
instead.
Methods configured with the aaa authentication enable command are evaluated in the order
they are configured. If authentication fails using the primary method, Dell Networking Operating System
1012 Security