White Papers

Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
Usage
Information
By default, the aaa authorization commands command configures the system to check both EXEC
level and CONFIGURATION level commands. Use the command no aaa authorization config-
commands to enable only EXEC-level command checking.
aaa authorization exec
Set parameters that restrict (or permit) a user’s access to EXEC-level commands.
Syntax
aaa authorization exec {name | default} {local || tacacs+ || if-
authenticated || none}
To disable authorization checking for EXEC level commands, use the no aaa authorization exec
command.
Parameters
name Define a name for the list of authorization methods.
default Define the default list of authorization methods.
local Use the authorization parameters on the system to perform authorization.
tacacs+ Use the TACACS+ protocol to perform authorization.
none Enter the keyword none to apply no authorization.
Defaults none
Command Modes CONFIGURATION
Supported Modes All Modes
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following table lists the Dell Networking OS version history for this command.
Version Description
9.9(0.0) Introduced on the FN IOM.
9.6.(0.0) Supported on the FN I/O Aggregator and M I/O Aggregator.
accounting
Apply an accounting method list to terminal lines.
Syntax
accounting {exec | commands {level | role role-name} method-list}
Parameters
exec Enter the keyword exec to apply an EXEC level accounting method list.
commands { level
| role role-name }
Enter the keywords commands level to apply an EXEC and CONFIGURATION
level accounting method list or enter the keywords commands role and then the
role name for accounting of commands run by a user with that role.
method-list Enter a method list that you defined using the aaa accounting exec or aaa
accounting commands.
1010 Security