White Papers

Table 64. Create a Redirect List
Command Syntax Command Mode Purpose
ip redirect-list redirect-
list-name
CONFIGURATION Create a redirect list by entering the
list name. Format 16 characters. Delete
the redirect list using the no ip
redirect list command.
The following example creates a redirect list by the name of ‘xyz’.
DellEMC(conf)#ip redirect-list ?
WORD Redirect-list name (max 16 chars)
DellEMC(conf)#ip redirect-list xyz
To set the rules for the redirect list, use the following command in Configuration redirect-list mode. You can enter
the command multiple times and create a sequence of redirect rules. To organize your rules, use the seq nn redirect
option.
Table 65. Create a Rule for a Redirect-list
Command Syntax Command Mode Purpose
seq {number} redirect {ip-
address | tunnel tunnel-id}
[track} {ip-protocol-number |
protocol-type [bit]} {source
mask | any | host ip-address}
{destination mask | any |
host ip-address}
CONFIGURATION Configure a rule for the redirect list.
number is the number in sequence
to initiate this rule.ip-address is
the Forwarding router’s address.unnel
is used to configure the tunnel
settings.tunnel-id is used to redirect
the traffic.track is used to track
the object-id.track is to enable
the tracking.FORMAT: A.B.C.DFORMAT:
slot/portip-protocol-number or protocol-
type is the type of protocol to
be redirected.FORMAT: 0-255 for IP
protocol number, or enter protocol
type.source ip-address or any or
host ip-address is the Source’s IP
address.FORMAT: A.B.C.D/NN, or ANY
or HOST IP address.destination ip-
address or any or host ip-address is
the Destination’s IP address.FORMAT:
A.B.C.D/NN, or ANY or HOST IP
address. Delete a rule with the no
redirect command. The redirect rule
supports Non-contiguous bitmasks for
PBR in the Destination router IP address.
The following shows an example of how to create a rule for a redirect list by configuring:
● IP address of the next-hop router in the forwarding route.
● IP protocol number.
● Source address with mask information.
● Destination address with mask information.
Creating a Rule Example:
DellEMC(conf-redirect-list)#redirect ?
A.B.C.D Forwarding router's address
DellEMC(conf-redirect-list)#redirect 3.3.3.3 ?
<0-255> An IP protocol number
icmp Internet Control Message Protocol
ip Any Internet Protocol
tcp Transmission Control Protocol
udp User Datagram Protocol
DellEMC(conf-redirect-list)#redirect 3.3.3.3 ip ?
A.B.C.D Source address
Policy-based Routing (PBR)
605