White Papers

clear trace
Clear the software trace log file from a Z9500 CPU.
Z9500
Syntax
clear trace software [rp | linecard slot-id]
Parameters
rp Enter the keyword rp to clear the software trace log from the Route Processor
CPU.
linecard slot-id Enter the linecard slot-id parameters to specify the line-card CPU whose
software trace log you want to clear.
Defaults Clear the trace log files from all Z9500 CPUs.
Command Modes CONFIGURATION
Command
History
Version 9.2(1.0) Introduced on the Z9500.
Version 8.1.1.0 Introduced on the E-Series ExaScale.
Version 7.5.1.0 Introduced on the C-Series.
Usage
Information
Trace log information is uploaded to flash:/TRACE_LOG_DIR.
configure
Enter CONFIGURATION mode from EXEC Privilege mode.
Syntax
configure [terminal]
Parameters
terminal
(OPTIONAL) Enter the keyword terminal to specify that you are configuring from the terminal.
Command Modes
EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell EMC Networking OS
Command Line Reference Guide.
Version
Description
9.10(0.0) Introduced on the S3148.
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S6100-ON.
88 Control and Monitoring