White Papers

Version Description
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series.
E-Series Original command.
Command Fields
Lines
Beginning
With
Description
Dell EMC
Network...
Name of the operating system
Dell EMC
Operating...
OS version number
Dell EMC
Application...
Software version
Copyright (c)... Copyright information
Build Time... Software build’s date stamp
Build Path... Location of the software build files loaded on the system
Dell EMC
Networking OS
uptime is...
Amount of time the system has been up
System image... Image file name
System Type: System name
Control
Processor:...
Control processor information and amount of memory on processor
128K bytes... Amount and type of memory on system
1 Route
Processor...
Hardware configuration of the system, including the number and type of physical
interfaces available
upgrade boot
Upgrade the bootflash or bootselector image running in all Z9500 CPUs, including the Control Processor, Route Processor, and
line cards. To upgrade the operating system image, use the upgrade system command.
Z9500
Syntax
upgrade boot {bootflash—image | bootselector-image} system all {booted |
flash: | ftp: | scp: | tftp: | usbflash:} file-url {A: |B:}
Parameters
bootflash-image Enter the keyword bootflash-image to upgrade the GRUB bootloader image.
bootselector-
image
Enter the keyword bootselector-image to upgrade the BIOS system image.
Use this option only with TAC supervision.
system all Enter the keywords system all to upgrade the bootflash or bootselector image
on all Z9500 CPUs: Control Processor, Route Processor, and line-card CPUs.
booted Enter the keyword booted to upgrade Z9500 CPUs using the currently loaded
operating system (OS) image.
68 File Management