White Papers

Version Description
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the S-Series.
7.7.1.0 Introduced on the C-Series.
7.5.1.0 Expanded to support the exclude and include options.
E-Series legacy
command
Usage
Information
A group in include mode must have at least one source address defined. In exclude mode, if you do
not specify a source address, Dell Networking OS implicitly assumes all sources are included. If you do not
specify either include or exclude, Dell Networking OS implicitly assumes a IGMPv2 static join.
Command Limitations
● Only one mode (include or exclude) is permitted per multicast group per interface. To configure
another mode, all sources belonging to the original mode must be unconfigured.
● If a static configuration is present and a packet for the same group arrives on an interface, the
dynamic entry completely overwrites all the static configuration for the group.
Related
Commands
show ip igmp groups — displays IGMP group information.
ip igmp version
Manually set the version of the router to IGMPv2 or IGMPv3.
Z9500
Syntax
ip igmp version {2 | 3}
Parameters
2 Enter the number 2 to set the IGMP version number to IGMPv2.
3 Enter the number 3 to set the IGMP version number to IGMPv3.
Defaults 2 (IGMPv2)
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100–ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
678 Internet Group Management Protocol (IGMP)