White Papers

Table Of Contents
Version Description
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100ON.
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Added support for VRF and Introduced on the S6000-ON.
9.5(0.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.8.1.0 Introduced on the C-Series and S-Series.
7.7.1.0 Introduced on the E-Series.
Usage
Information
Mapping applies to both v1 and v2 IGMP joins; any updates to the ACL are reflected in the IGMP groups.
You may not use extended access lists with this command. When you configure a static SSM map and the
router cannot find any matching access lists, the router continues to accept (*,G) groups.
Related
Commands
ip access-list standard create a standard access list to filter based on IP address.
ip igmp static-group
Configure an IGMP static group.
Syntax
ip igmp static-group {group address [exclude [source address]] | [include
{source address}]}
To delete a static address, use the no ip igmp static-group {group address [exclude
[source address]] | [include {source address}]} command.
Parameters
group address
Enter the group address in dotted decimal format (A.B.C.D).
exclude
source
address
(OPTIONAL) Enter the keyword exclude then the source address, in dotted
decimal format (A.B.C.D), for which a static entry is added.
include
source
address
(OPTIONAL) Enter the keyword include then the source address, in dotted
decimal format (A.B.C.D), for which a static entry is added.
Defaults none
Command Modes INTERFACE
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.7(0.0) Introduced on the S6000-ON.
9.5(0.1) Introduced on the Z9500.
Internet Group Management Protocol (IGMP) 677