White Papers

xor1 Use CRC16_BISYNC_AND_XOR1 — Upper 8 bits of CRC16-BISYNC and lower 8
bits of xor1.
xor2 Use CRC16_BISYNC_AND_XOR2 — Upper 8 bits of CRC16-BISYNC and lower 8
bits of xor2.
xor4 Use CRC16_BISYNC_AND_XOR4 — Upper 8 bits of CRC16-BISYNC and lower 8
bits of xor4.
xor8 Use CRC16_BISYNC_AND_XOR8 — Upper 8 bits of CRC16-BISYNC and lower 8
bits of xor8.
xor16 Use CR16 — 16 bit XOR.
crc16cc Use CRC16_CCITT — 16 bit CRC16 using CRC16-CCITT polynomial.
crc32MSB Use CRC32_UPPER — MSB 16 bits of computed CRC32.
crc32LSB Use CRC32_LOWER — LSB 16 bits of computed CRC32.
linecard slot-id
port-set port-
pipe
Enter the line-card slot ID and port-pipe number for the set of ports for which you
want to redistribute traffic flows. The range of Z9500 slot IDs is 0 to 2. The range
of port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and 2.
Defaults crc16 algorithm
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
8.3.11.4 Introduced on the Z9000.
hash-algorithm hg-seed
Select the seed value used in HiGig hashing.
Syntax
[no] hash-algorithm hg-seed number [linecard slot-id port-set port-pipe]
Parameters
hg-seed number Enter the keywords hg-seed then the hash algorithm seed value. The range is
from 0 to 2147483646.
linecard slot-id
port-set port-
pipe
(Optional) Enter the line-card slot ID and port-pipe number for the set of ports
for which you configure HiGig hashing. The range of Z9500 slot IDs is 0 to 2. The
range of port-pipe numbers is: 0 to 2 on line card 0; 0 to 3 on line cards 1 and 2.
port-set port-
pipe
Enter the keywords port-set then the line card’s port-pipe number. The range is
from 0 to 5.
Defaults 32-bit chassis MAC and system time
Command Modes CONFIGURATION
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
616 Equal Cost Multi-Path (ECMP)