White Papers

BOOT INTERFACE GATEWAY IP ADDRESS = variable does not exist
DellEMC#
show file
Display contents of a text file in the local filesystem.
Syntax
show file filesystem
Parameters
filesystem Enter one of the following:
● For internal flash, enter flash:
● For USB flash and external flash, enter usbflash:
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, refer to the relevant Dell
Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version Description
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
7.6.1.0 Introduced on the S-Series
7.5.1.0 Introduced on the C-Series
E-Series Original command
Example
Dell#show file flash://startup-config
!
boot system primary system ftp://test:server@10.16.1.144//home/images/
FTOS-ZC-9.2.1.0.bin
boot system secondary system flash://FTOS-ZC-9.2.1.0.bin
boot system default system ftp://:@/\
!
redundancy auto-synchronize persistent-data
redundancy primary rpm0
!
hostname Z9500-20
!
enable password 7 94849d8482d5c3
!
username test password 7 93e1e7e2ef
!
enable restricted 7 948a9d848cd5c3
!
protocol spanning-tree 0
bridge-priority 8192
rapid-root-failover enable
!
interface TenGigabitEthernet 0/0
no ip address
shutdown
File Management 61