White Papers

Parameters
interface
typeslot/port
Enter the keyword interface with the interface type and slot/port information
to display DHCP client information for a specified interface. The valid interface
types are:
● For a 10-Gigabit Ethernet interface, enter the keyword
tengigabitethernet.
● For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE.
Defaults none
Command Modes EXEC Privilege
Command
History
Version 9.2(1.0) Introduced on the Z9500.
Version 8.3.19.0 Introduced on the S4820T.
Version 8.3.11.1 Introduced on the Z9000.
Version 8.3.7.0 Introduced on the S4810.
Version 8.2.1.0 Introduced on the C-Series and S-Series.
Example
Dell# show ip dhcp client statistics interface fortyGigE 2/0
Interface Name Fo 2/0
Message Received
DHCPOFFER 9
DHCPACK 9
DHCPNAK 0
Message Sent
DHCPDISCOVER 53
DHCPREQUEST 9
DHCPDECLINE 0
DHCPRELEASE 6
DHCPREBIND 0
DHCPRENEW 0
DHCPINFORM 0
show ip dhcp configuration
Display the DHCP configuration.
Syntax
show ip dhcp configuration [global | pool name]
Parameters
pool name Display the configuration for a DHCP pool.
global Display the DHCP configuration for the entire system.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
Dynamic Host Configuration Protocol (DHCP) 587