White Papers

Version Description
9.8(0.0P5) Introduced on the S4048-ON.
9.8(0.0P2) Introduced on the S3048-ON.
9.7(0.0) Introduced on the S6000-ON.
9.6(0.0)
Added the keywords discard-counters, interface, and the variable
interface on the S4810, S4820T, S5000, S6000, Z9000, Z9500.
9.2(1.0) Introduced on the Z9500.
9.0.2.0 Introduced on the S6000.
8.3.19.0 Introduced on the S4820T.
8.3.11.1 Introduced on the Z9000.
8.3.7.0 Introduced on the S4810.
8.3.1.0 Introduced on the E-Series.
8.2.1.0 Introduced on the C-Series and S-Series.
Example
The following example shows how to clear the discard counters globally:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters
The following example shows how to clear the discard counters on an interface:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters interface TenGigE 1/10
The following example shows how to clear the discard counters on a port channel interface:
DellEMC> clear ip dhcp snooping source-address-validation discard-
counters interface portchannel 1
Related
Commands
● show ip dhcp snooping — display the contents of the DHCP binding table.
debug ipv6 dhcp
To enable debug logs for DHCPv6 relay agent transactions.
Syntax
debug ipv6 dhcp
To disable the debug logs for dhcpv6 relay agent transactions, use the debug ipv6 dhcp command.
Defaults None
Command Modes EXEC Privilege
Command
History
This guide is platform-specific. For command information about other platforms, see the relevant Dell
EMC Networking OS Command Line Reference Guide.
Version Description
9.10(0.1) Introduced on the S6010-ON and S4048T-ON.
9.10(0.0) Introduced on the S3148.
9.10(0.0) Introduced on the S6100-ON.
9.8(2.0) Introduced on the S3100 series.
9.8(1.0) Introduced on the Z9100–ON.
Dynamic Host Configuration Protocol (DHCP) 573