White Papers

Example
Dell#show hardware ipv6 eg-acl linecard 0 port-set 0
EID 0x000013ce: gid=0xd,
slice=0, slice_idx=0, part =0 prio=0x13ce, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0, part =1 prio=0x13ce, flags=0x10204,
Installed, Enabled
tcam: color_indep=0,
Offset: 1 Width: 8
DATA=0x0000003a
MASK=0x000000ff
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics=NULL
EID 0x0000130d: gid=0xd,
slice=0, slice_idx=0x1, part =0 prio=0x130d, flags=0x10202,
Installed, Enabled
tcam: color_indep=0,
StageEgress
slice=1, slice_idx=0x1, part =1 prio=0x130d, flags=0x10204,
Installed, Enabled
tcam: color_indep=0,
IpType
Offset: 208 Width: 5
DATA=0x00000004
MASK=0x0000000c
L3Routable
Offset: 166 Width: 1
DATA=0x00000001
MASK=0x00000001
OutPort
Offset: 195 Width: 7
DATA=0x00000001
MASK=0x0000007f
action={act=Drop, param0=0(0), param1=0(0), param2=0(0),
param3=0(0)}
policer=
statistics={stat id 110 slice = 0 idx=4 entries=1}{Packets}
Usage
Information
The port-set values are internal port numbers. For a cross reference of the internal and port numbers,
refer to the Debugging and Diagnostics chapter in the Dell Networking OS Configuration Guide for the
Z9500 System.
show hardware mac
Display MAC ACL entries for the specified stack-unit, port-pipe and pipeline ID.
Syntax
show hardware mac {eg-acl | in-acl} stack-unit id port-set 0–0
Parameters
eg-acl | in-acl Enter either the keyword eg-acl or the keyword in-acl to select between
ingress or egress ACL data.
stack- unit id Enter the keyword stack-unit to select the stack unit ID.
Debugging and Diagnostics 563